Xantrex Technology/Trace Engineering Power Panel - Single Inverter

Call us toll-free at 1.888.467.8044 for a free consultation.

Let us show you how you can install a solar energy system with zero up front costs and significant savings on your energy bill. more...

Three easy steps to a solar solution:

Step 1: Request a Quote
Step 2: In-Home Quote
Step 3: Installation

Catalog : Inverters/Chargers : Power Panel - Single Inverter - 4 kVA, 120 VAC

Xantrex Technology/Trace Engineering
Power Panel - Single Inverter - 4 kVA, 120 VAC

Xantrex Technology/Trace Engineering PP-SW4024-S
4.0 kVA - 24 VDC input, 120 VAC 60 Hz output, single SW4024 inverter, 120 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker

Finally a Low Cost Alternative to Assembling Components in the Field
Power Panels are Trace's first packaged power system. They are less expensive than an on-site component installation and meet many power application needs. To install a Power Panel, simply connect them to the battery, PV and or AC loads, Power Panels include inverters and are assembled by Trace with components specified by the dealer or customer.

Included in all Power Panel Systems:

Powder-coated steel backplate prewired with all NEC / UL required AC & DC overcurrent protection and disconnects (only for indoor installation). Simply connect to the battery and AC loads and your system is operational.
Can be used with wind, solar, or hydro DC charging sources
60 amp AC system bypass that allows inverter servicing while keeping AC loads connected to the grid or generator
ETL listed components and enclosure
Negative/ground bonding block

Options

Optional nonmetallic battery enclosure which doubles as a shipping enclosure
Single or dual C40 Charge controllers for solar, wind, hydro DC charging sources
Flexible conduit for connection of the system to the battery enclosure
One or two Trace SW or DR inverters

SW Series Power Panels

Sine wave AC power inverter with high-efficiency, bidirectional operation
Up to 11 kW of continuous AC power
Up to 60 amps of AC input from a generator or utility grid
Three-stage, temperature-compensated battery charging (up to 300A @ 12VDC, 240A @ 24 VDC, and 150A @ 48 VDC)
Utility-interactive and generator-support operating modes
Able to regulate up to 4.8 kW of power from solar or other DC charging sources
Available outputs of 105, 120, 230 or 120/240 vac at 50 or 60 Hz.
Available for a 12, 24 or 48-volt DC system

SW series II spec. sheet