Outback Power
DC Breaker Box

• This DC Disconnect/over current module has sufficient room to accommodate today's wiring needs as well as tomorrows add-ons.
• Breaker accommodations include 4 Heinemann Type GJ1 and 7 Heinemann CD series DC rated breakers.
• An Alternate mounting configuration will support 2 GJ1 and 10 CD series breakers.
• The bottom mounting floor is designed to facilitate a host of additional components. Among them are: 500A Deltec shunts, mercury displacement relays, bussman terminal blocks, a  DC plus bus, a DC negative bus.
• The removable side adapter plates accommodate one or two DR or SW inverters. ( other inverters to follow shortly) 
• The top and bottom ends are setup to hold up to (4) 2" conduits and (6) 3/4" conduit knockouts.
• The small Knockouts fit the trace C40 knockout spacing C40 charge controllers, just add the charge control bracket to either side of the DC box.
• Up to 3 C40's will fit on the bracket.
• Side knockouts on the C40 & DC box accommodate wiring.
• The cover plate has locators & knockouts for 2 trace meters.
• The DC box is currently being evaluated by ETL for certification.

Typical large PV hybrid system DC Disconnect. Shown with dual 250Amp inverter disconnects, two 60 amp PV array disconnects and GFP.
Also shown with charge control MDR contactors, 500 amp current shunt and array combiner power distribution blocks.

Room for Dual 4/0 cabling connectors on 500A current shunt with multi-tap terminal busbar.

Mounting holes for up to four shunts and terminal busbars.

One shunt and busbar come standard with the DC Disconnect.

Mounting holes for up to 8 Bussman/Magnum/ILSCO power distribution blocks.
(Bussman 162 series)

Installations · Contact · Products · Learn More · Site Map

©2008 Solar Cell Sales

888.467.8044